RJ11 Telecom Surge Protector (BPS-MJ6-1T) Hardwired Surge Protection
- Sheet
- P
- Listing
- None published
- Origin
- Hamilton Twp, NJ
- Revised
- 2026-08-27
The BPS-MJ6-1T is a single pair telephone line surge protector with RJ11 female connectors in and out, using a gas tube and clamping diode network, mounted on a wall through a metal bracket.
Features
- 1-pair Surge Protector
- For telephone line (PSTN or ADSL)
- RJ11 connector in/out
- Easy installation
- Wall mounting
- Complies IEC 61643-21 Standard
Specifications
| Brooks Power System Part Number | BPS – MJ6 – 1T |
|---|---|
| Application | PSTH or ADSL 1-pair surge protection |
| Bandwith | up to 10 MHz |
| Nominal line voltage (Un) | 150 V |
| Maximum line voltage (Uc) | 170 V |
| Residual Voltage (Up) | 210 V |
| Nominal discharge current (In) | 2.5 kA |
| I/O connectiona | RJ11 Female |
| Wiring | 3 – 4 |
| Mounting | Wall mounting through metal bracket |
| Grounding | By wire on equipment chassis |
Compliance and listings
Standards cited: IEC 61643-21
Typical applications
The BPS-MJ6-1T is installed between existing jacks on analog or digital telephone lines, protecting telephone sets, fax machines, modems, and ADSL terminals. It needs no more than the metal bracket connected to the installation ground.
Request a quote on the RJ11 Telecom Surge Protector (BPS-MJ6-1T) Hardwired Surge Protection
Send your configuration.
- No minimum order: one unit to full production.
- A person reads every request and replies within two working days.
Products we manufacture carry a two-year warranty.
Last updated