Hardwired Surge Protection
Hardwired and specialty surge protection, including panel-mounted AC units, DC signal line protection, and coaxial and telecom protectors.
10 series
- AC Power Panel Surge Protector (BPS-M Series)
The BPS-M Series is a panel-mounted surge protective device for AC distribution panels, in four surge ratings from 80 to 200 kA per phase, housed in a NEMA 4/12 enclosure. It is hardwired: there are no outlets and no cord.
- BPS5C/10C Series Surge Protector
The BPS5C/10C Series is a surge protective device for 120, 277, 347 and 480 volt single phase circuits, in 5 kA and 10 kA nominal discharge current ratings, all-mode, sealed to IP66, and wired in series or in parallel. It is hardwired: there are no outlets and no cord.
- BPS5K Series Surge Protector
The BPS5K Series is a surge protective device for 120, 277, 347 and 480 volt single phase circuits, rated 5 kA nominal discharge current and 10 kA maximum, sealed to IP66, and wired in series or in parallel. It is hardwired: there are no outlets and no cord.
- DC Signal Line Surge Protectors (BPS-B Series)
The BPS-B Series is a wall-mount DC signal line surge protector for telephone, datacom and instrumentation lines, in one, two and four pair versions, with a removable protection circuit board. It connects through screw terminals.
- DC Signal Line Surge Protectors (BPS-NPP Series)
The BPS-NPP Series is a 19 inch rack mounted signal line protection panel in 12, 24 and 48 port sizes, with 110 punchdown to RJ45 connectors and CAT6 and Power over Ethernet performance.
- Hard-Wire AC Power Surge Protector (BPS-MSB10)
The BPS-MSB10 is a hardwired AC surge protective device for single and two phase applications up to 480 Vac, with 18 kA maximum discharge current, in three models by supply voltage. It has no outlets and no cord.
- LED Surge Protector BPS5K1P277
The BPS5K1P277 is a compact surge protective device for 120 and 277 volt LED lighting circuits, rated 5 kA nominal discharge current and 10 kA maximum, with internal thermally fused MOV protection.
- Patch Panel Surge Protector (BPS-RPP Series)
The BPS-RPP Series is a patch panel signal line surge protector in 16 and 32 port sizes, available in U1 or U2 rack heights, with replaceable modules, and RJ to RJ or ATT110 to RJ interfaces.
- RJ11 Telecom Surge Protector (BPS-MJ6-1T)
The BPS-MJ6-1T is a single pair telephone line surge protector with RJ11 female connectors in and out, using a gas tube and clamping diode network, mounted on a wall through a metal bracket.
- Universal Gas Tube Coaxial Surge Protectors (BPS-P8AX Series)
The BPS-P8AX Series is a coaxial surge protector using a replaceable gas tube, DC to 5 GHz, in three DC breakdown ratings, waterproof to IP65, and available with three grounding options.
Comparing the series
Relevant compliance
Request a quote on hardwired surge protection
Send your configuration, a part number, or a description of what you need.
- No minimum order: one unit to full production.
- A person reads every request and replies within two working days.
Products we manufacture carry a two-year warranty.