DC Signal Line Surge Protectors
BPS - NPP- Series

......................................................................................................................

The BPS - NPP Series is 12, 24, and 48 port,19” rack mounted protection units that feature 110 punchdown to RJ45 connectors. This series feature CAT6 and POE performance for today’s high speed data networks. These products are also available in configurations that offer surge protection to Telco and ISDN circuits. All of these units exhibt an extermely fast response time of less than 5 nanoseconds.


All these features and more make the Brooks BPS - NPP Series the perfect solution for insuring infrastructure integrity.


  • Compact Form Factor

  • For telephone line (PSTN or ADSL)

  • Insures Network uptime and integrity

  • Ability to protect almost every device that sends data over copper

  • UL497B



Characteristics
Brooks Power System Part Number BPS - NPP BPS - NPP BPS - NPP BPS - NPP BPS - NPP
Max. date rate 1,000 Mbps 1,000 Mbps 1,000 Mbps 40 Mbps 40 Mbps
Max. DC Supply Voltage 7.5 Vdc 60 Vdc Pin 1, 2, 3, 6 : 7.5 Vdc
---------------------
Pin 4, 5, 7, 8: 60 Vdc
60 Vdc 240 Vdc
Max. DC Supply Current 750 mA 750 mA 750mA 750 mA 750 mA
Peak Pulse Current
(10/1000 μs at Max DC Supply Voltage)
100 A 50 A Pin 1,2,3,6: 132 A,
------------------------------
Pin 4,5,7,8:50 A
50 A 75 A
Max. Shunt Capacitance <8pF <8pF,
(ethernet lines only)
<8pF, (ethernet lines only ) <75pF <95pF
Number of Ports available ( xx ) 12, 24 or 48 12, 24 or 48 12, 24 or 48 12 12
Applications: 100/1000 Base T,
CAT5/5E/6, Ethernet
Power over Ethernet, Mode A Power over Ethernet, Mode B ISDN, T1, DDN Dial-up Modem Fax
Connections:
- Input
- Output
110 Block
RJ45 Female Connectors
Pinout 8 wires per connector
Installation Flush Mount
Ground Connection Screw Lug or Mounting Flange
Standard Compliance UL497B, IEEE 802-3af (transmision )