AC Power Panel Surge Protector (BPS - M Series)













BPS - M Series

.............................................................................................................................................................................

 

  • 80-200kA transient Amps protection(8/20μs)

  • All modes of protection

  • 200kAIC Fault Current Rated

  • Multi-redundant protection circuit per phase

  • Full On-Board Diagnostics— LED

  • Indicators, remote & audible alarms

  • EMI/RFI Noise Filtering

  • NEMA 4/12 enclosure

  • 10-Year warranty

 

BPS - M Series is a high performance surge protector designed for critical panel locations. The SPD incorporates high-energy MOVs with EMI/RFI noise filtering to provide protection against transients originating from induced lightning strikes and utility switching.

Real-time diagnostics include LED fault indicators for each phase as well as the presence of abnormal voltages between the neutral to ground mode, where applicable. Form C dry contacts for remote indication and an audible alarm ensure the BPS - M Series is always at full capacity.

Housed in a rugged NEMA 4/12 enclosure these devices are suitable for harsh indoor or outdoor applications. The BPS - M Series is available for all voltages and configurations up to 480Vac.


Model** Configuration
AC-Power-Panel-Surge-Protector-table-2
UL1449 3KA 8/20 (VPR) Joules1
AC-Power-Panel-Surge-Protector-table-1
Characteristics
1 Surge Handling  
2 BPS - M200 200kA/phase
3 BPS - M160 160kA/phase
4 BPS - M100 100kA/phase
5 BPS - M80 80kA/phase
6 Nominal Discharge Current(In) 3kA & 5kA
7 Protection Modes L-N, L-G, N-G, L-L
8 LED Indicators Yes
9 Audible Alarm Yes
10 Remote Signaling Form C dry contacts
11 Connecting Wire Size #10 AWG
12 Response Time <5 nanoseconds
13 Dimensions 8” x 6” x 4”
14 Enclosure NEMA 4/12 enclosure
15 Weight 8 lbs